roles: run ansible-lint --write

Actually, we do want to run fail2ban on all hosts because the sshd
monitoring via systemd is nice. At the very least it reduces spam
from failed logins in our systemd journal.

roles/caddy/tasks/main.yml

@@ -18,7 +18,7 @@
     dest: /etc/apt/keyrings/caddy-stable-archive-keyring.key
     owner: root
     group: root
-    mode: 0644
+    mode: "0644"
   register: download_caddy_signing_key
   when: not caddy_signing_key_stat.stat.exists
   tags:
@@ -27,7 +27,7 @@
 
 - name: Add Caddy stable repo
   ansible.builtin.apt_repository:
-    repo: 'deb [signed-by=/etc/apt/keyrings/caddy-stable-archive-keyring.key] https://dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main'
+    repo: deb [signed-by=/etc/apt/keyrings/caddy-stable-archive-keyring.key] https://dl.cloudsmith.io/public/caddy/stable/deb/debian any-version main
     filename: caddy-stable
     state: present
   register: add_caddy_apt_repository
@@ -38,9 +38,7 @@
 - name: Update apt cache
   ansible.builtin.apt: # noqa no-handler
     update_cache: true
-  when:
-    (download_caddy_signing_key.status_code is defined and download_caddy_signing_key.status_code == 200) or
-    add_caddy_apt_repository is changed
+  when: (download_caddy_signing_key.status_code is defined and download_caddy_signing_key.status_code == 200) or add_caddy_apt_repository is changed
   tags:
     - packages
     - caddy
@@ -59,7 +57,7 @@
   ansible.builtin.template:
     src: etc/caddy/Caddyfile.j2
     dest: /etc/caddy/Caddyfile
-    mode: 0755
+    mode: "0755"
     owner: root
     group: root
   notify:
@@ -70,7 +68,7 @@
   ansible.builtin.file:
     path: /etc/caddy/conf.d
     state: directory
-    mode: 0755
+    mode: "0755"
     owner: root
     group: root
 

roles/caddy/tasks/vhosts.yml

@@ -1,10 +1,9 @@
 ---
-
 - name: Configure vhosts
   ansible.builtin.template:
     src: etc/caddy/conf.d/vhost.j2
     dest: /etc/caddy/conf.d/{{ item.domain_name }}
-    mode: 0644
+    mode: "0644"
     owner: root
     group: root
   loop: "{{ nginx_vhosts }}"

roles/common/handlers/main.yml

@@ -2,19 +2,26 @@
 # ansible.builtin.file: roles/common/handlers/main.yml
 
 - name: reload sshd
-  ansible.builtin.systemd: name={{ sshd_service_name }} state=reloaded
+  ansible.builtin.systemd:
+    name: "{{ sshd_service_name }}"
+    state: reloaded
 
 - name: reload sysctl
   command: sysctl -p /etc/sysctl.conf
 
 - name: reload systemd
-  ansible.builtin.systemd: daemon_reload=true
+  ansible.builtin.systemd:
+    daemon_reload: true
 
 - name: restart nftables
-  ansible.builtin.systemd: name=nftables state=restarted
+  ansible.builtin.systemd:
+    name: nftables
+    state: restarted
 
 # 2021-09-28: note to self to keep fail2ban at the end, as handlers are executed
 # in the order they are defined, not in the order they are listed in the task's
 # notify statement and we must restart fail2ban after updating the firewall.
 - name: restart fail2ban
-  ansible.builtin.systemd: name=fail2ban state=restarted
+  ansible.builtin.systemd:
+    name: fail2ban
+    state: restarted

roles/common/tasks/cron-apt.yml

@@ -1,10 +1,9 @@
 ---
-
 - name: Configure cron-apt (config)
   ansible.builtin.copy: src={{ item.src }} dest={{ item.dest }} mode={{ item.mode }} owner={{ item.owner }} group={{ item.group }}
   loop:
-    - { src: 'etc/cron-apt/config', dest: '/etc/cron-apt/config', mode: '0644', owner: 'root', group: 'root' }
-    - { src: 'etc/cron-apt/3-download', dest: '/etc/cron-apt/action.d/3-download', mode: '0644', owner: 'root', group: 'root' }
+    - { src: etc/cron-apt/config, dest: /etc/cron-apt/config, mode: "0644", owner: root, group: root }
+    - { src: etc/cron-apt/3-download, dest: /etc/cron-apt/action.d/3-download, mode: "0644", owner: root, group: root }
 
 - name: Configure cron-apt (security)
   ansible.builtin.template: src=security.sources.list.j2 dest=/etc/apt/security.sources.list mode=0644 owner=root group=root

roles/common/tasks/fail2ban.yml

@@ -1,21 +1,32 @@
 ---
+- name: Install fail2ban
+  when:
+    - ansible_distribution_major_version is version('11', '>=')
+  ansible.builtin.package:
+    name:
+      - fail2ban
+      - python3-systemd
+    state: present
+    cache_valid_time: 3600
+
 - name: Configure fail2ban sshd filter
   ansible.builtin.template:
     src: etc/fail2ban/jail.d/sshd.local.j2
     dest: /etc/fail2ban/jail.d/sshd.local
     owner: root
-    mode: 0644
+    mode: "0644"
   notify: restart fail2ban
 
 - name: Configure fail2ban nginx filter
   when:
+    - webserver is defined and webserver == 'nginx'
     - extra_fail2ban_filters is defined
     - "'nginx' in extra_fail2ban_filters"
   ansible.builtin.template:
     src: etc/fail2ban/jail.d/nginx.local.j2
     dest: /etc/fail2ban/jail.d/nginx.local
     owner: root
-    mode: 0644
+    mode: "0644"
   notify: restart fail2ban
 
 - name: Create fail2ban service override directory
@@ -23,7 +34,7 @@
     path: /etc/systemd/system/fail2ban.service.d
     state: directory
     owner: root
-    mode: 0755
+    mode: "0755"
 
 # See Arch Linux's example: https://wiki.archlinux.org/index.php/Fail2ban
 - name: Configure fail2ban service override
@@ -31,7 +42,7 @@
     src: etc/systemd/system/fail2ban.service.d/override.conf.j2
     dest: /etc/systemd/system/fail2ban.service.d/override.conf
     owner: root
-    mode: 0644
+    mode: "0644"
   notify:
     - reload systemd
     - restart fail2ban

roles/common/tasks/firewall_Debian.yml

@@ -6,10 +6,8 @@
       when: ansible_distribution_major_version is version('11', '>=')
       ansible.builtin.package:
         name:
-        - fail2ban
           - libnet-ip-perl # for aggregate-cidr-addresses.pl
           - nftables
-        - python3-systemd
           - curl # for nftables update scripts
         state: present
         cache_valid_time: 3600
@@ -26,7 +24,7 @@
         src: nftables.conf.j2
         dest: /etc/nftables.conf
         owner: root
-      mode: 0644
+        mode: "0644"
       notify:
         - restart nftables
         - restart fail2ban
@@ -37,23 +35,23 @@
         path: /etc/nftables
         state: directory
         owner: root
-      mode: 0755
+        mode: "0755"
 
     - name: Copy extra nftables configuration files
       when: ansible_distribution_major_version is version('11', '>=')
       ansible.builtin.copy:
         src: "{{ item.src }}"
-      dest: "/etc/nftables/{{ item.src }}"
+        dest: /etc/nftables/{{ item.src }}
         owner: root
         group: root
-      mode: 0644
+        mode: "0644"
         force: "{{ item.force }}"
       loop:
-      - { src: "spamhaus-ipv4.nft", force: "no" }
-      - { src: "spamhaus-ipv6.nft", force: "no" }
-      - { src: "abusech-ipv4.nft", force: "no" }
-      - { src: "abuseipdb-ipv4.nft", force: "yes" }
-      - { src: "abuseipdb-ipv6.nft", force: "yes" }
+        - { src: spamhaus-ipv4.nft, force: "no" }
+        - { src: spamhaus-ipv6.nft, force: "no" }
+        - { src: abusech-ipv4.nft, force: "no" }
+        - { src: abuseipdb-ipv4.nft, force: "yes" }
+        - { src: abuseipdb-ipv6.nft, force: "yes" }
       notify:
         - restart nftables
         - restart fail2ban
@@ -62,8 +60,8 @@
       when: ansible_distribution_version is version('11', '>=')
       ansible.builtin.copy:
         src: "{{ item }}"
-      dest: "/usr/local/bin/{{ item }}"
-      mode: 0755
+        dest: /usr/local/bin/{{ item }}
+        mode: "0755"
         owner: root
         group: root
       loop:
@@ -75,8 +73,8 @@
       when: ansible_distribution_version is version('11', '>=')
       ansible.builtin.copy:
         src: "{{ item }}"
-      dest: "/etc/systemd/system/{{ item }}"
-      mode: 0644
+        dest: /etc/systemd/system/{{ item }}
+        mode: "0644"
         owner: root
         group: root
       loop:
@@ -110,7 +108,8 @@
         enabled: true
 
     - ansible.builtin.include_tasks: fail2ban.yml
-    when: ansible_distribution_major_version is version('9', '>=')
+      when:
+        - ansible_distribution_major_version is version('9', '>=')
   tags: firewall
 
 # vim: set sw=2 ts=2:

roles/common/tasks/firewall_Ubuntu.yml

@@ -3,12 +3,11 @@
 
 - block:
     - name: Install Ubuntu firewall packages
+      when: ansible_distribution_version is version('20.04', '>=')
       ansible.builtin.package:
         name:
-        - fail2ban
           - libnet-ip-perl # for aggregate-cidr-addresses.pl
           - nftables
-        - python3-systemd
           - curl # for nftables update scripts
         state: present
         cache_valid_time: 3600
@@ -24,7 +23,7 @@
         src: nftables.conf.j2
         dest: /etc/nftables.conf
         owner: root
-      mode: 0644
+        mode: "0644"
       notify:
         - restart nftables
         - restart fail2ban
@@ -35,23 +34,23 @@
         path: /etc/nftables
         state: directory
         owner: root
-      mode: 0755
+        mode: "0755"
 
     - name: Copy extra nftables configuration files
       when: ansible_distribution_version is version('20.04', '>=')
       ansible.builtin.copy:
         src: "{{ item.src }}"
-      dest: "/etc/nftables/{{ item.src }}"
+        dest: /etc/nftables/{{ item.src }}
         owner: root
         group: root
-      mode: 0644
+        mode: "0644"
         force: "{{ item.force }}"
       loop:
-      - { src: "spamhaus-ipv4.nft", force: "no" }
-      - { src: "spamhaus-ipv6.nft", force: "no" }
-      - { src: "abusech-ipv4.nft", force: "no" }
-      - { src: "abuseipdb-ipv4.nft", force: "yes" }
-      - { src: "abuseipdb-ipv6.nft", force: "yes" }
+        - { src: spamhaus-ipv4.nft, force: "no" }
+        - { src: spamhaus-ipv6.nft, force: "no" }
+        - { src: abusech-ipv4.nft, force: "no" }
+        - { src: abuseipdb-ipv4.nft, force: "yes" }
+        - { src: abuseipdb-ipv6.nft, force: "yes" }
       notify:
         - restart nftables
         - restart fail2ban
@@ -60,8 +59,8 @@
       when: ansible_distribution_version is version('20.04', '>=')
       ansible.builtin.copy:
         src: "{{ item }}"
-      dest: "/usr/local/bin/{{ item }}"
-      mode: 0755
+        dest: /usr/local/bin/{{ item }}
+        mode: "0755"
         owner: root
         group: root
       loop:
@@ -73,8 +72,8 @@
       when: ansible_distribution_version is version('20.04', '>=')
       ansible.builtin.copy:
         src: "{{ item }}"
-      dest: "/etc/systemd/system/{{ item }}"
-      mode: 0644
+        dest: /etc/systemd/system/{{ item }}
+        mode: "0644"
         owner: root
         group: root
       loop:
@@ -108,7 +107,8 @@
         enabled: true
 
     - ansible.builtin.include_tasks: fail2ban.yml
-    when: ansible_distribution_version is version('16.04', '>=')
+      when:
+        - ansible_distribution_version is version('16.04', '>=')
   tags: firewall
 
 # vim: set sw=2 ts=2:

roles/common/tasks/main.yml

@@ -1,6 +1,6 @@
 ---
 - name: Import OS-specific variables
-  ansible.builtin.include_vars: "vars/{{ ansible_distribution }}.yml"
+  ansible.builtin.include_vars: vars/{{ ansible_distribution }}.yml
   tags: always
 
 - name: Configure network time

roles/common/tasks/ntp.yml

@@ -12,8 +12,8 @@
 # I can see on existing servers, systemd-timesyncd is a standalone package on
 # Ubuntu 20.04 and Debian 11.
 - name: Install systemd-timesyncd
-  when: (ansible_distribution == 'Ubuntu' and ansible_distribution_version is version('20.04', '==')) or
-        (ansible_distribution == 'Debian' and ansible_distribution_version is version('11', '>='))
+  when: (ansible_distribution == 'Ubuntu' and ansible_distribution_version is version('20.04', '==')) or (ansible_distribution == 'Debian' and ansible_distribution_version
+    is version('11', '>='))
   ansible.builtin.apt: name=systemd-timesyncd state=present cache_valid_time=3600
 
 - name: Start and enable systemd's NTP client

roles/common/tasks/packages_Debian.yml

@@ -1,5 +1,4 @@
 ---
-
 - name: Configure Debian packages
   block:
     # Create directory for third-party package signing keys. Required on distros
@@ -9,7 +8,7 @@
     - name: Create /etc/apt/keyrings
       file:
         path: /etc/apt/keyrings
-        mode: 0755
+        mode: "0755"
         owner: root
         group: root
         state: directory

roles/common/tasks/packages_Ubuntu.yml

@@ -1,5 +1,4 @@
 ---
-
 - name: Configure Ubuntu packages
   block:
     # Create directory for third-party package signing keys. Required on distros
@@ -9,7 +8,7 @@
     - name: Create /etc/apt/keyrings
       file:
         path: /etc/apt/keyrings
-        mode: 0755
+        mode: "0755"
         owner: root
         group: root
         state: directory

roles/common/tasks/ssh-keys.yml

@@ -3,7 +3,7 @@
   ansible.builtin.file: dest={{ provisioning_user.home }}/.ssh/authorized_keys state=absent
 
 - name: Add public keys to authorized_keys
-  ansible.posix.authorized_key: { user: '{{ provisioning_user.name }}', key: "{{ lookup('file',item) }}" }
+  ansible.posix.authorized_key: { user: "{{ provisioning_user.name }}", key: "{{ lookup('file',item) }}" }
   with_fileglob:
     # use descriptive names for keys, like: aorth-mzito-rsa.pub
     - ssh-pub-keys/*.pub

roles/common/tasks/sshd.yml

@@ -1,8 +1,8 @@
 ---
-
 # SSH configs don't change in Debian minor versions
 - name: Reconfigure /etc/ssh/sshd_config
-  ansible.builtin.template: src=sshd_config_{{ ansible_distribution }}-{{ ansible_distribution_major_version }}.j2 dest=/etc/ssh/sshd_config owner=root group=root mode=0600
+  ansible.builtin.template: src=sshd_config_{{ ansible_distribution }}-{{ ansible_distribution_major_version }}.j2 dest=/etc/ssh/sshd_config owner=root group=root
+    mode=0600
   when: ansible_distribution == 'Debian'
   notify: reload sshd
 

roles/common/tasks/tarsnap.yml

@@ -1,24 +1,45 @@
 ---
-- name: Add Tarsnap apt mirror
-  ansible.builtin.template: src=tarsnap_sources.list.j2 dest=/etc/apt/sources.list.d/tarsnap.list owner=root group=root mode=0644
+- name: Check tarsnap apt signing key
+  ansible.builtin.stat:
+    path: /etc/apt/keyrings/tarsnap-deb-packaging-key.asc
+  register: tarsnap_signing_key_stat
+
+- name: Download tarsnap apt signing key
+  ansible.builtin.get_url:
+    url: https://pkg.tarsnap.com/tarsnap-deb-packaging-key.asc
+    dest: /etc/apt/keyrings/tarsnap-deb-packaging-key.asc
+    owner: root
+    group: root
+    mode: "0644"
+  register: download_tarsnap_signing_key
+  when: not tarsnap_signing_key_stat.stat.exists
+
+- name: Add tarsnap.org repo
+  ansible.builtin.template:
+    src: tarsnap_sources.list.j2
+    dest: /etc/apt/sources.list.d/tarsnap.list
+    owner: root
+    group: root
+    mode: "0644"
   register: add_tarsnap_apt_repository
   when: ansible_architecture != 'armv7l'
 
-- name: Add GPG key for Tarsnap
-  ansible.builtin.apt_key: id=0xF608BA1BFB5CE8F8CAB088359F084BEE7F938A76 url=https://pkg.tarsnap.com/tarsnap-deb-packaging-key.asc state=present
-  register: add_tarsnap_apt_key
-
 - name: Update apt cache
-  ansible.builtin.apt:
+  ansible.builtin.apt: # noqa no-handler
     update_cache: true
-  when:
-    add_tarsnap_apt_key is changed or
-    add_tarsnap_apt_repository is changed
+  when: (download_tarsnap_signing_key.status_code is defined and download_tarsnap_signing_key.status_code == 200) or add_tarsnap_apt_repository is changed
 
 - name: Install tarsnap
-  ansible.builtin.apt: pkg=tarsnap cache_valid_time=3600
+  ansible.builtin.apt:
+    pkg: tarsnap
+    cache_valid_time: 3600
 
 - name: Copy tarsnaprc
-  ansible.builtin.copy: src=tarsnaprc dest=/root/.tarsnaprc owner=root group=root mode=0600
+  ansible.builtin.copy:
+    src: tarsnaprc
+    dest: /root/.tarsnaprc
+    owner: root
+    group: root
+    mode: "0600"
 
 # vim: set sw=2 ts=2:

roles/mariadb/tasks/main.yml

@@ -1,7 +1,7 @@
 ---
 - name: Remove MariaDB key from apt-key
   ansible.builtin.apt_key:
-    id: 0x177F4010FE56CA3336300305F1656F24C74CD1D8
+    id: "013577200103762554506315430003013705453362230723150730"
     state: absent
   tags:
     - packages
@@ -21,7 +21,7 @@
     dest: /etc/apt/keyrings/mariadb_release_signing_key.asc
     owner: root
     group: root
-    mode: 0644
+    mode: "0644"
   register: download_mariadb_signing_key
   when: not mariadb_signing_key_stat.stat.exists
   tags:
@@ -30,7 +30,8 @@
 
 - name: Add MariaDB 10.6 repo
   ansible.builtin.apt_repository:
-    repo: 'deb [arch=amd64 signed-by=/etc/apt/keyrings/mariadb_release_signing_key.asc] https://dlm.mariadb.com/repo/mariadb-server/10.6/repo/debian {{ ansible_distribution_release }} main'
+    repo: deb [arch=amd64 signed-by=/etc/apt/keyrings/mariadb_release_signing_key.asc] https://dlm.mariadb.com/repo/mariadb-server/10.6/repo/debian {{ ansible_distribution_release
+      }} main
     filename: mariadb
     state: present
   register: add_mariadb_apt_repository
@@ -41,16 +42,14 @@
 - name: Update apt cache
   ansible.builtin.apt: # noqa no-handler
     update_cache: true
-  when:
-    (download_mariadb_signing_key.status_code is defined and download_mariadb_signing_key.status_code == 200) or
-    add_mariadb_apt_repository is changed
+  when: (download_mariadb_signing_key.status_code is defined and download_mariadb_signing_key.status_code == 200) or add_mariadb_apt_repository is changed
   tags:
     - packages
     - mariadb
 
 - name: Install mariadb-server
   ansible.builtin.apt:
-    name: ['mariadb-server', 'python3-pymysql']
+    name: [mariadb-server, python3-pymysql]
     state: present
     cache_valid_time: 3600
   tags: mariadb, packages
@@ -61,7 +60,7 @@
     dest: /etc/mysql/my.cnf
     owner: root
     group: root
-    mode: 0644
+    mode: "0644"
   notify:
     - restart mariadb
   tags: mariadb
@@ -83,7 +82,7 @@
     src: .my.cnf.j2
     dest: /root/.my.cnf
     owner: root
-    mode: 0600
+    mode: "0600"
   tags: mariadb
 
 # See: https://docs.ansible.com/ansible/latest/collections/community/mysql/mysql_db_module.html

roles/nginx/defaults/main.yml

@@ -14,11 +14,11 @@ nginx_ssl_session_cache: shared:SSL:10m
 # 1400 bytes to fit in one MTU (default is 16k!)
 nginx_ssl_buffer_size: 1400
 nginx_ssl_dhparam: /etc/ssl/certs/dhparam.pem
-nginx_ssl_protocols: 'TLSv1.2 TLSv1.3'
+nginx_ssl_protocols: TLSv1.2 TLSv1.3
 
 # DNS resolvers for OCSP stapling (default to Cloudflare public DNS)
 # See: https://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_stapling
-nginx_ssl_stapling_resolver: '1.1.1.1 1.0.0.1 [2606:4700:4700::1111] [2606:4700:4700::1001]'
+nginx_ssl_stapling_resolver: 1.1.1.1 1.0.0.1 [2606:4700:4700::1111] [2606:4700:4700::1001]
 
 # HTTP Strict-Transport-Security header, recommended by Google to be ~1 year
 # in seconds, see: https://hstspreload.org/

roles/nginx/tasks/letsencrypt.yml

@@ -1,5 +1,4 @@
 ---
-
 # Use acme.sh instead of certbot because they only support installation via
 # snap now.
 - block:
@@ -25,7 +24,7 @@
       ansible.builtin.get_url:
         url: https://raw.githubusercontent.com/acmesh-official/acme.sh/master/acme.sh
         dest: "{{ letsencrypt_acme_script_temp }}"
-      mode: 0700
+        mode: "0700"
       register: acme_download
       when: not acme_home.stat.exists
 
@@ -64,7 +63,7 @@
       ansible.builtin.template:
         src: renew-letsencrypt.service.j2
         dest: /etc/systemd/system/renew-letsencrypt.service
-      mode: 0644
+        mode: "0644"
         owner: root
         group: root
 
@@ -72,7 +71,7 @@
       ansible.builtin.copy:
         src: renew-letsencrypt.timer
         dest: /etc/systemd/system/renew-letsencrypt.timer
-      mode: 0644
+        mode: "0644"
         owner: root
         group: root
 
@@ -84,8 +83,8 @@
         enabled: true
         daemon_reload: true
 
-  when: (ansible_distribution == 'Ubuntu' and ansible_distribution_version is version('20.04', '=='))
-        or (ansible_distribution == 'Debian' and ansible_distribution_version is version('11', '=='))
+  when: (ansible_distribution == 'Ubuntu' and ansible_distribution_version is version('20.04', '==')) or (ansible_distribution == 'Debian' and ansible_distribution_version
+    is version('11', '>='))
   tags: letsencrypt
 
 # vim: set ts=2 sw=2:

roles/nginx/tasks/main.yml

@@ -1,7 +1,7 @@
 ---
 - name: Remove nginx apt signing key from apt-key
   ansible.builtin.apt_key:
-    id: 0x573BFD6B3D8FBC641079A6ABABF5BD827BD9BF62
+    id: "053473772654754373614404074646527257655730117366337542"
     state: absent
   tags:
     - packages
@@ -21,7 +21,7 @@
     dest: /usr/share/keyrings/nginx_signing.key
     owner: root
     group: root
-    mode: 0644
+    mode: "0644"
   register: download_nginx_signing_key
   when: not nginx_signing_key_stat.stat.exists
   tags:
@@ -34,7 +34,7 @@
     dest: /etc/apt/sources.list.d/nginx_org_sources.list
     owner: root
     group: root
-    mode: 0644
+    mode: "0644"
   register: add_nginx_apt_repository
   tags:
     - nginx
@@ -43,9 +43,7 @@
 - name: Update apt cache
   ansible.builtin.apt: # noqa no-handler
     update_cache: true
-  when:
-    (download_nginx_signing_key.status_code is defined and download_nginx_signing_key.status_code == 200) or
-    add_nginx_apt_repository is changed
+  when: (download_nginx_signing_key.status_code is defined and download_nginx_signing_key.status_code == 200) or add_nginx_apt_repository is changed
 
 - name: Install nginx
   ansible.builtin.apt:
@@ -60,7 +58,7 @@
   ansible.builtin.template:
     src: nginx.conf.j2
     dest: /etc/nginx/nginx.conf
-    mode: 0644
+    mode: "0644"
     owner: root
     group: root
   notify:
@@ -70,8 +68,8 @@
 - name: Copy extra nginx configs
   ansible.builtin.copy:
     src: "{{ item }}"
-    dest: "/etc/nginx/{{ item }}"
-    mode: 0644
+    dest: /etc/nginx/{{ item }}
+    mode: "0644"
     owner: root
     group: root
   loop:
@@ -93,7 +91,7 @@
     state: directory
     owner: nginx
     group: nginx
-    mode: 0755
+    mode: "0755"
   tags: nginx
 
 - name: Configure nginx virtual hosts
@@ -110,7 +108,7 @@
   ansible.builtin.template:
     src: blank-vhost.conf.j2
     dest: "{{ nginx_confd_path }}/blank-vhost.conf"
-    mode: 0644
+    mode: "0644"
     owner: root
     group: root
   notify:
@@ -121,7 +119,7 @@
   ansible.builtin.copy:
     src: munin.conf
     dest: /etc/nginx/conf.d/munin.conf
-    mode: 0644
+    mode: "0644"
     owner: root
     group: root
   notify:

roles/nginx/tasks/vhosts.yml

@@ -1,5 +1,4 @@
 ---
-
 - block:
     - name: Configure https vhosts
       ansible.builtin.template: src=vhost.conf.j2 dest={{ nginx_confd_path }}/{{ item.domain_name }}.conf mode=0644 owner=root group=root
@@ -8,7 +7,8 @@
         - reload nginx
 
     - name: Generate self-signed TLS cert
-    ansible.builtin.command: openssl req -x509 -nodes -sha256 -days 365 -subj "/C=SO/ST=SO/L=snakeoil/O=snakeoil/CN=snakeoil" -newkey rsa:2048 -keyout /etc/ssl/private/nginx-snakeoil.key -out /etc/ssl/certs/nginx-snakeoil.crt -extensions v3_ca creates=/etc/ssl/certs/nginx-snakeoil.crt
+      ansible.builtin.command: openssl req -x509 -nodes -sha256 -days 365 -subj "/C=SO/ST=SO/L=snakeoil/O=snakeoil/CN=snakeoil" -newkey rsa:2048 -keyout /etc/ssl/private/nginx-snakeoil.key
+        -out /etc/ssl/certs/nginx-snakeoil.crt -extensions v3_ca creates=/etc/ssl/certs/nginx-snakeoil.crt
       notify:
         - reload nginx
 

roles/nginx/tasks/wordpress.yml

@@ -1,8 +1,8 @@
 ---
-
 - block:
     - name: Install WordPress
-    ansible.builtin.git: repo=https://github.com/WordPress/WordPress.git dest={{ nginx_root_prefix }}/{{ item.domain_name }}/wordpress version={{ item.wordpress_version }} depth=1 force=true
+      ansible.builtin.git: repo=https://github.com/WordPress/WordPress.git dest={{ nginx_root_prefix }}/{{ item.domain_name }}/wordpress version={{ item.wordpress_version
+        }} depth=1 force=true
       when:
         - item.has_wordpress is defined
         - item.has_wordpress

roles/php-fpm/handlers/main.yml

@@ -3,4 +3,10 @@
 - name: reload php7.4-fpm
   ansible.builtin.systemd: name=php7.4-fpm state=reloaded
 
+# For Debian 12
+- name: reload php8.2-fpm
+  ansible.builtin.systemd:
+    name: php8.2-fpm
+    state: reloaded
+
 # vim: set ts=2 sw=2:

roles/php-fpm/tasks/Debian_12.yml

@@ -0,0 +1,50 @@
+---
+- block:
+    - name: Set php-fpm packages
+      ansible.builtin.set_fact:
+        php_fpm_packages:
+          - php8.2-fpm
+          # for WordPress
+          - php8.2-mysql
+          - php8.2-gd
+          - php8.2-curl
+          - php8.2-xml
+
+    - name: Install php-fpm and deps
+      ansible.builtin.apt:
+        name: "{{ php_fpm_packages }}"
+        state: present
+        update_cache: true
+
+    # only copy php-fpm config for vhosts that need WordPress or PHP
+    - name: Copy php-fpm pool config
+      ansible.builtin.template:
+        src: php8.2-pool.conf.j2
+        dest: /etc/php/8.2/fpm/pool.d/{{ item.domain_name }}.conf
+        owner: root
+        group: root
+        mode: "0644"
+      loop: "{{ nginx_vhosts }}"
+      when: (item.has_wordpress is defined and item.has_wordpress) or (item.needs_php is defined and item.needs_php)
+      notify: reload php8.2-fpm
+
+    - name: Remove default www pool
+      ansible.builtin.file:
+        path: /etc/php/8.2/fpm/pool.d/www.conf
+        state: absent
+      notify: reload php8.2-fpm
+
+    # re-configure php.ini
+    - name: Update php.ini
+      ansible.builtin.template:
+        src: php8.2-php.ini.j2
+        dest: /etc/php/8.2/fpm/php.ini
+        owner: root
+        group: root
+        mode: "0644"
+      notify: reload php8.2-fpm
+
+  tags: php-fpm
+  when: install_php
+
+# vim: set ts=2 sw=2:

roles/php-fpm/tasks/Ubuntu_20.04.yml

@@ -1,5 +1,4 @@
 ---
-
 - block:
     - name: Set php-fpm packages
       ansible.builtin.set_fact:

roles/php-fpm/tasks/main.yml

@@ -1,6 +1,7 @@
 ---
 # Ubuntu 20.04 uses PHP 7.4
 # Debian 11 uses PHP 7.4
+# Debian 12 uses PHP 8.2
 
 # If any of the vhosts on this host need WordPress then we need to install PHP.
 # This uses selectattr to filter the list of dicts in nginx_vhosts, selecting
@@ -10,13 +11,13 @@
 - name: Check if any vhost needs WordPress
   ansible.builtin.set_fact:
     install_php: true
-  when: "nginx_vhosts | selectattr('has_wordpress', 'defined') | selectattr('has_wordpress', 'equalto', true) | list | length > 0"
+  when: nginx_vhosts | selectattr('has_wordpress', 'defined') | selectattr('has_wordpress', 'equalto', true) | list | length > 0
 
 # Legacy, was only for Piwik, but leaving for now.
 - name: Check if any vhost needs PHP
   ansible.builtin.set_fact:
     install_php: true
-  when: "nginx_vhosts | selectattr('needs_php', 'defined') | selectattr('needs_php', 'equalto', true) | list | length > 0"
+  when: nginx_vhosts | selectattr('needs_php', 'defined') | selectattr('needs_php', 'equalto', true) | list | length > 0
 
 # If install_php has not been set, then we assume no vhosts need PHP. This is
 # a bit hacky, but it's the closest we come to an if/then/else.
@@ -30,7 +31,7 @@
   when:
     - ansible_distribution == 'Ubuntu'
     - ansible_distribution_version is version('20.04', '==')
-    - install_php == true
+    - install_php
   tags: php-fpm
 
 - name: Configure php-fpm on Debian 11
@@ -38,7 +39,15 @@
   when:
     - ansible_distribution == 'Debian'
     - ansible_distribution_major_version is version('11', '==')
-    - install_php == true
+    - install_php
+  tags: php-fpm
+
+- name: Configure php-fpm on Debian 12
+  ansible.builtin.include_tasks: Debian_12.yml
+  when:
+    - ansible_distribution == 'Debian'
+    - ansible_distribution_major_version is version('12', '==')
+    - install_php
   tags: php-fpm
 
 # vim: set ts=2 sw=2:

roles/php-fpm/templates/php8.2-pool.conf.j2

@@ -0,0 +1,492 @@
+{% set domain_name  = item.domain_name %}
+
+; Start a new pool named '{{ domain_name }}'.
+; the variable $pool can be used in any directive and will be replaced by the
+; pool name ('{{ domain_name }}' here)
+[{{ domain_name }}]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'access.log'
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; Unix user/group of the child processes. This can be used only if the master
+; process running user is root. It is set after the child process is created.
+; The user and group can be specified either by their name or by their numeric
+; IDs.
+; Note: If the user is root, the executable needs to be started with
+;       --allow-to-run-as-root option to work.
+; Default Values: The user is set to master process running user by default.
+;                 If the group is not set, the user's group is used.
+user = www-data
+group = www-data
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
+;                            a specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = /run/php/php8.2-fpm-{{ domain_name }}.sock
+
+; Set listen(2) backlog.
+; Default Value: 511 (-1 on Linux, FreeBSD and OpenBSD)
+;listen.backlog = 511
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions. The owner
+; and group can be specified either by name or by their numeric IDs.
+; Default Values: Owner is set to the master process running user. If the group
+;                 is not set, the owner's group is used. Mode is set to 0660.
+listen.owner = www-data
+listen.group = www-data
+;listen.mode = 0660
+
+; When POSIX Access Control Lists are supported you can set them using
+; these options, value is a comma separated list of user/group names.
+; When set, listen.owner and listen.group are ignored
+;listen.acl_users =
+;listen.acl_groups =
+
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Set the associated the route table (FIB). FreeBSD only
+; Default Value: -1
+;listen.setfib = 1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool processes will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Set the process dumpable flag (PR_SET_DUMPABLE prctl for Linux or
+; PROC_TRACE_CTL procctl for FreeBSD) even if the process user
+; or group is different than the master process user. It allows to create process
+; core dump and ptrace the process for the pool user.
+; Default Value: no
+; process.dumpable = yes
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;             pm.max_spawn_rate    - the maximum number of rate to spawn child
+;                                    processes at once.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 5
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: (min_spare_servers + max_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 1
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 3
+
+; The number of rate to spawn child processes at once.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+; Default Value: 32
+;pm.max_spawn_rate = 32
+
+; The number of seconds after which an idle process will be killed.
+; Note: Used only when pm is set to 'ondemand'
+; Default Value: 10s
+;pm.process_idle_timeout = 10s;
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. It shows the following information:
+;   pool                 - the name of the pool;
+;   process manager      - static, dynamic or ondemand;
+;   start time           - the date and time FPM has started;
+;   start since          - number of seconds since FPM has started;
+;   accepted conn        - the number of request accepted by the pool;
+;   listen queue         - the number of request in the queue of pending
+;                          connections (see backlog in listen(2));
+;   max listen queue     - the maximum number of requests in the queue
+;                          of pending connections since FPM has started;
+;   listen queue len     - the size of the socket queue of pending connections;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes;
+;   max active processes - the maximum number of active processes since FPM
+;                          has started;
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic' and 'ondemand');
+; Value are updated in real time.
+; Example output:
+;   pool:                 www
+;   process manager:      static
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          62636
+;   accepted conn:        190460
+;   listen queue:         0
+;   max listen queue:     1
+;   listen queue len:     42
+;   idle processes:       4
+;   active processes:     11
+;   total processes:      15
+;   max active processes: 12
+;   max children reached: 0
+;
+; By default the status page output is formatted as text/plain. Passing either
+; 'html', 'xml' or 'json' in the query string will return the corresponding
+; output syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+;   http://www.foo.bar/status?xml
+;
+; By default the status page only outputs short status. Passing 'full' in the
+; query string will also return status for each pool process.
+; Example:
+;   http://www.foo.bar/status?full
+;   http://www.foo.bar/status?json&full
+;   http://www.foo.bar/status?html&full
+;   http://www.foo.bar/status?xml&full
+; The Full status returns for each process:
+;   pid                  - the PID of the process;
+;   state                - the state of the process (Idle, Running, ...);
+;   start time           - the date and time the process has started;
+;   start since          - the number of seconds since the process has started;
+;   requests             - the number of requests the process has served;
+;   request duration     - the duration in µs of the requests;
+;   request method       - the request method (GET, POST, ...);
+;   request URI          - the request URI with the query string;
+;   content length       - the content length of the request (only with POST);
+;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
+;   script               - the main script called (or '-' if not set);
+;   last request cpu     - the %cpu the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because CPU calculation is done when the request
+;                          processing has terminated;
+;   last request memory  - the max amount of memory the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because memory calculation is done when the request
+;                          processing has terminated;
+; If the process is in Idle state, then informations are related to the
+; last request the process has served. Otherwise informations are related to
+; the current request being served.
+; Example output:
+;   ************************
+;   pid:                  31330
+;   state:                Running
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          63087
+;   requests:             12808
+;   request duration:     1250261
+;   request method:       GET
+;   request URI:          /test_mem.php?N=10000
+;   content length:       0
+;   user:                 -
+;   script:               /home/fat/web/docs/php/test_mem.php
+;   last request cpu:     0.00
+;   last request memory:  0
+;
+; Note: There is a real-time FPM status monitoring sample web page available
+;       It's available in: /usr/share/php/8.2/fpm/status.html
+;
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The address on which to accept FastCGI status request. This creates a new
+; invisible pool that can handle requests independently. This is useful
+; if the main pool is busy with long running requests because it is still possible
+; to get the status before finishing the long running requests.
+;
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
+;                            a specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Default Value: value of the listen option
+;pm.status_listen = 127.0.0.1:9001
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The access log file
+; Default: not set
+;access.log = log/$pool.access.log
+
+; The access log format.
+; The following syntax is allowed
+;  %%: the '%' character
+;  %C: %CPU used by the request
+;      it can accept the following format:
+;      - %{user}C for user CPU only
+;      - %{system}C for system CPU only
+;      - %{total}C  for user + system CPU (default)
+;  %d: time taken to serve the request
+;      it can accept the following format:
+;      - %{seconds}d (default)
+;      - %{milliseconds}d
+;      - %{milli}d
+;      - %{microseconds}d
+;      - %{micro}d
+;  %e: an environment variable (same as $_ENV or $_SERVER)
+;      it must be associated with embraces to specify the name of the env
+;      variable. Some examples:
+;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
+;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
+;  %f: script filename
+;  %l: content-length of the request (for POST request only)
+;  %m: request method
+;  %M: peak of memory allocated by PHP
+;      it can accept the following format:
+;      - %{bytes}M (default)
+;      - %{kilobytes}M
+;      - %{kilo}M
+;      - %{megabytes}M
+;      - %{mega}M
+;  %n: pool name
+;  %o: output header
+;      it must be associated with embraces to specify the name of the header:
+;      - %{Content-Type}o
+;      - %{X-Powered-By}o
+;      - %{Transfert-Encoding}o
+;      - ....
+;  %p: PID of the child that serviced the request
+;  %P: PID of the parent of the child that serviced the request
+;  %q: the query string
+;  %Q: the '?' character if query string exists
+;  %r: the request URI (without the query string, see %q and %Q)
+;  %R: remote IP address
+;  %s: status (response code)
+;  %t: server time the request was received
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsulated in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %T: time the log has been written (the request has finished)
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsulated in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %u: remote user
+;
+; Default: "%R - %u %t \"%m %r\" %s"
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{milli}d %{kilo}M %C%%"
+
+; A list of request_uri values which should be filtered from the access log.
+;
+; As a security precuation, this setting will be ignored if:
+;     - the request method is not GET or HEAD; or
+;     - there is a request body; or
+;     - there are query parameters; or
+;     - the response code is outwith the successful range of 200 to 299
+;
+; Note: The paths are matched against the output of the access.format tag "%r".
+;       On common configurations, this may look more like SCRIPT_NAME than the
+;       expected pre-rewrite URI.
+;
+; Default Value: not set
+;access.suppress_path[] = /ping
+;access.suppress_path[] = /health_check.php
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = log/$pool.log.slow
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+
+; Depth of slow log stack trace.
+; Default Value: 20
+;request_slowlog_trace_depth = 20
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; The timeout set by 'request_terminate_timeout' ini option is not engaged after
+; application calls 'fastcgi_finish_request' or when application has finished and
+; shutdown functions are being called (registered via register_shutdown_function).
+; This option will enable timeout limit to be applied unconditionally
+; even in such cases.
+; Default Value: no
+;request_terminate_timeout_track_finished = no
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environment, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+
+; Decorate worker output with prefix and suffix containing information about
+; the child that writes to the log and if stdout or stderr is used as well as
+; log level and time. This options is used only if catch_workers_output is yes.
+; Settings to "no" will output data as written to the stdout or stderr.
+; Default value: yes
+;decorate_workers_output = no
+
+; Clear environment in FPM workers
+; Prevents arbitrary environment variables from reaching FPM worker processes
+; by clearing the environment in workers before env vars specified in this
+; pool configuration are added.
+; Setting to "no" will make all environment variables available to PHP code
+; via getenv(), $_ENV and $_SERVER.
+; Default Value: yes
+;clear_env = no
+
+; Limits the extensions of the main script FPM will allow to parse. This can
+; prevent configuration mistakes on the web server side. You should only limit
+; FPM to .php extensions to prevent malicious users to use other extensions to
+; execute php code.
+; Note: set an empty value to allow all extensions.
+; Default Value: .php
+;security.limit_extensions = .php .php3 .php4 .php5 .php7
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'.
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M